Installing a new sink is easy and fast which will result in a huge difference inside your kitchen. The installation moment can be also an excellent time for adding other elements to your sink such as garbage disposal/ under water filter. Here below are the things related to the topic of how to install kitchen sink.
1. Firstly, the hole where the basin will be placed must be prepared first. If there is already a hole, ensure that the area around the hole is cleaned. Get the surface cleaned as well as dry. Get any leftover caulk scraped, and ensure that the surface is dry & clean.
2. Get holes drilled in all 4 corners on the cut line’s corners. The holes are better to be big enough that will accommodate the jigsaw inside it. Get a cut made along the bottom and top of the hole using your jigsaw. Get a scrap piece screwed for making sure the counter will not crack.
3. Get the faucet and drains dry-fitted into the hole for ensuring that everything will simply fit. If you are sure everything is OK, then you can go to the next step for how to install kitchen sink.
4. Get the faucet & other accessories which will be added attached. There should be instructions which come with your sink which is from the sink’s manufacturer.
5. Get your sink placed upside down over the hole. Get the sink’s lip lined using your silicone caulk/ plumber’s putty and ensuring that the coverage is even all the way around the lip. Get the sink flipped over and get it seated in the hole. Get any mounting brackets attached. If there is excess caulk which has been squeezed out from under the lip, get it removed using a damp, clean cloth.
6. Speak about how to install kitchen sink get your drain & water supply lines attached . Get the supply lines turned and then get the aerator removed from the faucet’s end. Get the water turned on then wait for a minute or so. Make sure it works perfectly.
0 comments:
Post a Comment